Motorcycle Models: #S-B 711 - #S-B 700 - #S-B 710
Aerodynamics features as applied to Models #S-B 700 and #S-B 710. These models have two vertical reflective strips on the front side of the vest that may suggest these strips flap while cycling at various high speeds. As the flow of air passes over and around the cyclist it creates a sail effect on the back side of the cyclist vest. This force on the back side of the vest becomes a pull force on the front side of the vest, thus, the front reflective strips are pulled against the cyclist body and eliminates any flapping that may occur. The design features of these vests successfully controls both front and back forces applied against the safety vest while the cyclist is in motion.
See-Bak's mark of excellence for safer cycling is located high on the back of the vest. This emblem can be replaced with the safety triangle emblem shown in #S-B 711 below. The vest will be shipped with the mark of excellence shown in #S-B 700 and #S-B 710 unless specified otherwise. Customized reflective identification panels are available to motorcycle clubs. The customer's art work would be required.
For information on cold weather cycling explore See-Bak's Health Kit. Enter from Product Line menu.
|
|
 |
 |
# S-B 711 |
# S-B 700 |
# S-B 710 |
|
|
Click on pictures above for additional information
|
|
The models shown above do not violate any of OSHA's Federal Regulations. Models #S-B 700 and #S-B 710 conform to guidelines set by ANSI/ISEA (American National Standard for High-Visibility Safety Apparel) for retroreflective vests when the base material used is a certified Fluorescent Lime or International Orange material. Reflexite's Certified Brilliance Series Retroreflective Florescent Lime materials is used on all vests.
